All About AC Repair Daily

What Should I Check After AC Installation?

Sep 22

AC installation Grapevine, TXYou finally took the plunge and installed a new air conditioner. Congratulations! This can be a big investment and one that will hopefully provide your family with years of cool, comfortable indoor temperatures.

But before you sit back and enjoy the fruits of your labor, there are a few post AC installation Grapevine, TX checklist items you should take care of first to ensure everything is in working order.

  • Check for loose wiring. 

Loose wiring is more than just a nuisance; it can be a serious fire hazard. The U.S. Fire Administration reports that electrical fires account for an average of 9% of all reported home fires each year. Checking for and fixing loose wiring after AC installation Grapevine, TX can help prevent a fire from starting in your home. 

Tighten any loose screws and bolts with a screwdriver or wrench. Once tightened and secured, replace the access panel and turn the power back on at the breaker box. If you are not comfortable doing this yourself, you can always call in an experienced electrician for assistance.

  • Test the thermostat. 

Once everything is secured and in place, your next AC installation in Grapevine, TX task is to test out your new thermostat. If it is not installed accurately, your unit could end up working overtime to try to reach the temperature you've set it at. It doesn't only wastes energy and drives up your utility bills but can also shorten the lifespan of your unit.

Make sure to read the instructions carefully so that you know how to operate the thermostat properly. Set the temperature to a comfortable level and see if the AC kicks on accordingly. 

  • Inspect the air ducts. 

You can inspect the air ducts yourself by checking for any obvious signs of damage, such as holes or leaks. Are the seams between the sections of the air ducts properly sealed? If not, you may need to have them resealed. AC installation Grapevine, TX should also ensure that the air ducts are properly insulated to prevent heat loss.

In addition, check to see if there are obstructions in the ductwork that could reduce airflow. This could be anything from dust and debris to insulation that's been dislodged over time. 

  • Clean the coils on the outdoor unit. 

The evaporator and condenser coils are made of thin metal fins that help increase their surface area so that they can more effectively remove heat. Over time, these fins can become bent or clogged with dirt, leaves, or other outdoor debris. When this happens, it inhibits the coils' ability to remove heat, which makes your system work harder and less efficiently. 

To clean the coils, turn off the power to the air conditioner at the breaker box and use a soft brush attachment on a vacuum cleaner to gently remove any dirt or debris. Then, rinse the coils with water from a garden hose. Be sure not to use too much pressure, as this can damage the delicate fins. Allow the coils to air dry completely before turning the power back on at the breaker box and restarting your unit.

  • Schedule an annual tune-up. 

No post AC installation Grapevine, TX checklist would be complete without mentioning the importance of scheduling an annual tune-up for your unit. This is something you should do even if your system seems to be working fine. A tune-up helps ensure it runs as efficiently as possible and can help prevent small issues from turning into larger, more expensive problems.

Turn to Hightower Service for Expert Air Conditioning Installation!

Why trust anyone but the best for your AC installation Grapevine, TX? Hightower Service has been providing top-quality air conditioning installation and other HVAC services to homeowners in Grapevine and the surrounding areas for decades.

For more information or to schedule a consultation, contact 214-441-7998.