HVAC London Ontario | Proven Strategies for Keeping Your HVAC System Running at Peak Performance

Understand your HVAC System

Your heating and cooling systems distribute heat or cold throughout your home. They do this by exchanging energy with the outside environment using one of two methods: convective or thermal exchange. Convective exchange happens when warm air rises and moves across colder areas, while thermal sale occurs when hot air moves from more desirable areas into cooler ones.

When a furnace begins to run low on fuel, it will start switching to thermal exchange mode instead of convection mode to conserve energy. The fan will stop blowing cold air into rooms and start circulating hot air instead. This process can take up to an hour, depending on the condition of the furnace (i.e., if there are obstructions in its path). If you notice unusual noises coming from your furnace or any other parts of your HVAC system, be sure to call a professional!

Make Sure your System is Maintained Correctly

It’s essential to maintain your HVAC system correctly to avoid any issues. Frequent and unscheduled repairs can lead to increased energy costs, reduced efficiency, and a decreased quality of life. Here are some things you should do regularly to ensure your HVAC system is functioning optimally:

– Check the filters regularly – Air filter replacements should be done at least once every six months, and dustbin/pump replacement every two years.

– Inspect the ductwork – Ensure all ducts are clean and free of obstructions, especially around registers and heat exchangers. This will help improve airflow throughout the system and reduce moisture buildup.

– Tune up or replace heating/ cooling units as needed – Heating/cooling units may require calibration or simple tune-ups if they’re within their manufacturer’s warranty period; check with your dealer for more information.

– Clean out vents & registers regularly – Vents must be kept clear of leaves, debris, etc., for warm or cold air to move freely through the system; reco

Check for Leaks and Correct Them

One of the most common problems with HVAC systems is water leakage. This can occur in several ways, including broken or missing pipes, joints, or valves. If you notice any water leaking from your HVAC system, it’s essential to address the issue immediately.

Leaking water not only causes damage to your equipment and flooring, but it can also lead to serious health hazards. In severe cases, leaked water has been known to cause carbon monoxide poisoning and fire.

There are several steps that you can take to prevent leaks and correct them if they do happen: 

– Check for signs of trouble early – Look for wet spots on the ground or near your air handler (box fan). These indicate potential leaks nearby that need attention.

– Check all plumbing connections – Make sure there are no cracks in the pipe where cold groundwater might enter during freezing weather; check both ends of each pipe connection for corrosion deposits. Failing to seal these connections properly can allow moisture and pests into your home, causing costly repairs down the line!

– Keep areas around vents free of obstructions – Ventilation spaces should be kept clear so warm air doesn’t gather unduly inside appliances like A/C units; this will reduce their ability to expel heat efficiently, leading to overheating and even failure!

Regularly Check the Filters and Replace Them When Necessary

Regularly checking and replacing filters on appliances, such as air conditioners, furnaces, and water heaters, is an integral part of home maintenance. Doing so can help improve the air quality in your home, reduce energy costs, and prevent costly repairs. It is essential to check the filters periodically and replace them when they become dirty or clogged. If the filters are not returned, the appliance may not work efficiently and could cause damage to the appliance and your home. Replacing the filters can help extend the appliance’s life and reduce the number of allergens and dust in the air.

Tune your System as Needed

Tuning your HVAC system is regularly and proactively optimizing, calibrating, and adjusting the system to ensure it runs efficiently and effectively. This helps to reduce energy costs, improve air quality, and maximize the life of your system. Tune-ups should be done at least once a year but may be more frequent depending on the type and age of your system. The tune-up should include checking and adjusting the air filter, thermostat, dampers, blower, and other components. In addition, the technician should check for signs of wear and tear, such as cracks, corrosion, and water leaks. Tune-ups can also help to identify and repair problems before they become more serious, saving you money in the long run.

Check the Temperature Settings and Make Sure they're Appropriate

Temperature settings are an essential part of keeping a comfortable and healthy environment in a home or business. It is necessary to check these settings regularly to ensure they are set at an appropriate temperature for the space. Too low or too high a temperature can lead to discomfort and health issues.  

When checking the temperature settings, the first step is determining the ideal temperature for the space. This should be based on the type of space and the people using it. For example, the suitable temperaperfectfor a bedroom is typically lower than for a living room.

Once the ideal temperature is determined, it is essential to ensure the HVAC settings are set correctly. If the temperature settings are too low or too high, adjustments should be made to bring them within a comfortable range. If the settings are too far off, it is best to call a professional to make the necessary adjustments.

It is also essential to check the HVAC temperature settings regularly, as they can change over time. This is especially true if there has been a change in the environment, such as adding a new window or installing air conditioning. By checking the settings regularly, any necessary adjustments can be made.

Properly Ventilate your Home

Properly ventilating your home is an essential part of keeping your home healthy and comfortable. It helps to reduce the buildup of pollutants, excessive humidity, and excess heat. Proper ventilation also helps to reduce the risk of mold and mildew growth, and it can help to improve the efficiency of your heating and cooling systems. Improving ventilation in your home can be done by opening windows, using fans, and installing ventilation systems. It is essential to ensure that your home is ventilated correctly to ensure the health and comfort of all occupants.